ADJUSTABLE VENEER ANCHORS FOR WOOD STUD

Adjustable veneer anchors are used for anchoring brick veneer to wood stud with the #400 wood screw
RJ-711
The plate is available in either 14 gauge or 12 gauge; the adjustable hook is made of 3/16″ diameter wire.
Availible in mill galvvanized, hbot dip galvanized and stainless steel.
Hook lengths are 3-1/4″, 4-1/4″ and 5-1/4″.
Hook adjustments are a maximum of 1-1/4″ up to down.
Availible for walls with 1″, 1-1/2″, 2″, 2-1/2″, 3″, 3-1/2″ and 4″ insulation.

The Wire Bond RJ-711 plate (#2401) with a 3/16″ adjustable tie meets the Brick Institute of America’s requirement of a maximum deflection of fewer than .05 inches (1.2 mm) when tested at an axial load of 100 pounds in tension and compression. Pintle adjustments are a maximum of 1-1/4″ up or down and prevent in-and-out movement beyond allowable tolerance.

Description

WIRE  – BOND : MASONRY TO WOOD STUD

Close Menu
0
×

Cart